ĐỒ MẶC NHÀ PIJAMA LỤA MANGO THIẾT KẾ QUẦN ĐÙI
Béo thì giấu bụng, gầy thì tôn dáng Đồ mặc nhà pijama lụa mango thiết kế tay ngắn quần dài freesize từ 42-58kg...
BỘ DA ĐẸP TÓC ĐEN, DƯỠNG SÁNG DA MẶT WONMOM
Bộ da đẹp tóc đen, dưỡng sáng da mặt, kích thích mọc tóc suôn mượt Wonmom là bộ sản phẩm bao gồm 2 sản phẩm...
SET ĐỒ BỘ NỮ MẶC NHÀ THIẾT KẾ GEMMI FASHION
Với thiết kế đơn giản và bảng màu đa dạng, bộ da cá cotton cao cấp là gợi ý hoàn hảo cho set đồ đôi khi mùa đông...
ÁO COTTON HỒNG ĐỖ CROPTOP IN HOA AP222P52
Sản phẩm được làm từ chất liệu cotton với nhiều ưu điểm: khả năng thấm hút tuyệt vời, an toàn với làn da, đặc biệt...

DIY Coconut Planter: An Eco-Friendly Project for Your Home Garden

Discussion in 'Rao vặt tổng hợp' started by thanhcongcraft, Jul 10, 2024 at 10:56 AM.

  1. How to make a coconut planter? Creating a coconut planter is a fun and eco-friendly project. Here’s a step-by-step guide to help you make one:

    Materials Needed:
    • A whole coconut
    • A hand saw or power saw
    • Sandpaper
    • Drill with different sized bits
    • Rope or twine
    • Potting soil
    • Plants or seeds of your choice
    • Water
    [​IMG]

    Instructions:
    1. Choose Your Coconut:
      • Select a mature, dry coconut. It should be brown and have a hard shell.
    2. Prepare the Coconut:
      • Drain the Coconut: Locate the three "eyes" on one end of the coconut. One of these eyes is softer than the others. Use a drill or screwdriver to puncture this eye, then drain the coconut water into a container.
      • Cut the Coconut: Use a saw to cut the coconut in half. You can cut it either lengthwise or crosswise, depending on the shape you prefer for your planter.
    3. Clean the Shell:
      • Remove the Flesh: Scoop out the coconut flesh using a spoon or knife. Ensure the inside is clean and free of any remaining coconut meat.
      • Sand the Edges: Use sandpaper to smooth out the edges of the cut coconut shell. This will prevent any sharp edges that could cause injury.
    4. Drill Drainage Holes:
      • Create Drainage: Drill a few small holes in the bottom of the coconut halves to allow excess water to drain out. This is crucial for preventing root rot in your plants.
    5. Prepare for Hanging (Optional):
      • Attach Rope or Twine: If you want to hang your coconut planter, drill three or four evenly spaced holes near the rim of the coconut. Thread a piece of rope or twine through each hole and tie a knot on the inside to secure it. Gather the ends of the ropes and tie them together at the top to create a hanger.
    6. Add Potting Soil:
      • Fill the coconut shell with potting soil, leaving some space at the top for your plants.
    7. Plant Your Plants:
      • Choose small plants or seeds that will thrive in the size of your coconut planter. Gently plant them in the soil, following the planting instructions for the specific plant or seed you have chosen.
    8. Water and Maintain:
      • Water the planter as needed, being careful not to overwater. The drainage holes will help excess water escape.
    Tips:
    • Plant Selection: Consider using succulents, herbs, or small flowers that do not require a lot of space for roots.
    • Location: Place your coconut planter in a spot that receives appropriate sunlight for the plants you’ve chosen.
    • Decoration: You can decorate the outside of the coconut shell with paint or natural decorations if desired.
    Enjoy your new coconut planter and the touch of nature it brings to your space!
     

Share This Page